Features

How to use


U60*

World time

Setting the time zone

Time zone is set by choosing an area name on this watch.
For time zone of each area, see “Table of time zones and representative places”.

Setting time zone for the digital indication

!

The time zone set for the digital indication has no relationship with signal reception.

  1. Pull the crown out to position 1.
  2. An area name and “(M)” appear alternately on the digital indication (L).

  3. Rotate the crown to set the mode hand to [TME] or [CAL].
  4. !

    Turn the crown so that the mode hand will point to the center of the mode name securely.

  5. Press and release the upper right button B or the lower right button A repeatedly to choose an area.
  6. The area indication on the top of the digital indication (R) changes and the time and calendar of the indication change correspondingly.

    !

    Each time you press the button, area indication changes in the order on “Table of time zones and representative places”.

    !

    Pressing and holding the button changes area names continuously. Press any button to stop changing.

  7. Push the crown in to position 0 to finish the procedure.

Setting time zone for the analog indication

The signal station to be received is decided depending on the area you set for the time of analog indication.

Set the area you want to change to to the time of the digital indication, then interchange the setting with that of the analog indication.

  1. Choose the area you want to set for the analog indication as the area setting for the digital indication.
  2. !

    See “Setting time zone for the digital indication” above.

  3. Pull the crown out to position 1.
  4. An area name and “(M)” appear alternately on the digital indication (L).

  5. Rotate the crown to set the mode hand to [TME] or [CAL].
  6. !

    Turn the crown so that the mode hand will point to the center of the mode name securely.

  7. Press and release the upper right button B and the lower right button A at the same time.
  8. Times of the digital and analog indications are interchanged and area names on the digital indication (R) and (L) are also interchanged.

  9. Push the crown in to position 0 to finish the procedure.

Related articles

World time function Checking time zone setting Table of time zones and representative places Changing show/hide setting of areas

Next:

Changing show/hide setting of areas