Features

Troubleshooting


W510

All Reset

Resetting the watch - All Reset

When the watch does not work properly, you can reset all the settings.
If the power reserve is insufficient, charge the watch first.

The setting values after All Reset

Time0:00:00AM
CalendarJanuary 1 of leap year, Sunday
Pairing informationPairing information is not removed.
Connection statusDisconnection

Resetting the watch - All Reset

  1. Pull the crown out to position 2.
  2. The second hand points 15 seconds.

  3. Press and hold the upper right button B and the lower right button A at the same time for 4 seconds or more and release them.
  4. As you release the buttons, the alarm sounds and all reset is executed.

    After finishing All Reset, correct the reference position following the steps below.

    Correct reference positions

    Hour, minute and second hands: 0 hour 00 minute 0 second

    Function hand: slot 1

    Date indication: midway between “31” and “1”

  5. Press and Press and release the lower right button A.
  6. This will enable you to start correcting the reference position.

  7. Press the lower right button A to change the target to correct.
  8. !

    Each time you press the lower right button A, the target changes as follows.
    Function hand/date indicationhour handminute handsecond hand → (back to the top)

    !

    The hands and indications slightly move when selected to show they become adjustable.

  9. Rotate the crown to adjust the hand/indication.
  10. !

    The function hand and date indication move synchronously.
    Date indication changes to the next as the function hand rotates 5 times.

    !

    When adjusting the hour hand, the second and minute hands slightly escape left and right to provide clearer view of the hour hand.

    !

    When you rotate the crown quickly a few times, the hand/indication will move continuously.
    To stop the rapid movement, rotate the crown in either direction.

  11. Repeat steps 5 and 6.
  12. Push the crown in to position 0.
  13. The watch keeps to indicate the reference position.

  14. Press and release the lower right button A to finish the procedure.
  15. !

    The hands and indication returns normal in 2 minutes without pressing the lower right button A.


Adjust the time and calendar after that.

Related articles

Connection and disconnection Adjusting the time and calendar manually