Features

How to use


W770

Alarm

Changing alarm setting

  1. Pull the crown out to position 1.
  2. The second hand points to 30 seconds and stops.

  3. Rotate the crown to change the mode to [ALM].
  4. Pull the crown out to position 2.
  5. The hour, minute and 24-hour hands indicate the alarm time currently set and the function hand shows the alarm setting (ALM ON/OFF).

  6. Press and hold the lower right button A for 2 seconds or more.
  7. The minute hand slightly moves and the alarm time setting becomes adjustable.

  8. Rotate the crown to set the alarm time.
  9. !

    Check AM/PM referring to the 24-hour hand.

    !

    When you rotate the crown quickly a few times, the hand/indication will move continuously.
    To stop the rapid movement, rotate the crown in either direction.

  10. Press and release the lower right button A to set the alarm setting (ALM ON/OFF).
  11. !

    Each time you press the lower right button A, ON and OFF changes alternately.

  12. Push the crown in to position 0.
  13. Pull the crown out to position 1.
  14. Rotate the crown to change the mode to [TME].
  15. Push the crown in to position 0 to finish the procedure.

Related articles

Alarm Indicating alarm setting

Next:

Checking the alarm sound