Cal. No. W770
Refine your searchW770
Pairing (registration)
Cannot register the second or subsequent smartphone
You must switch saving destination of registration information when you register the second and subsequent smartphones.
Followings are the cases:
- I cannot register my new smartphone.
- I cannot register my second smartphone.
- I could register two or more smartphones but I cannot now.
1. Check the power reserve of the watch.
!
Charge the watch until level 2 when the power reserve level is "1" or lower.
!
You cannot execute operation for registration when the power reserve level of the watch is "0".
- Pull the crown out to position 1.
- Rotate the crown to change the mode to [TME].
- Push the crown in to position 0.
- Press the lower right button A repeatedly to make the function hand indicate power reserve.
The second hand points to 30 seconds and stops.
2. Check registration information.
- Start the dedicated app on a smartphone which has ever been connected with the watch.
- Check "Paring info" on the app to see if any free saving destination exists or not.
!
Check whether there is any free space in the saving destination of registration information.
!
When free saving destination exists, proceed to "Switching the saving destination of registration information".
You must remove registration information following the next step, "Removing registration information", to make a free saving destination when no free one exists.
3. Remove registration information.
- Pull the crown out to position 2.
- Rotate the crown to choose registration information to remove.
- Press and hold the upper right button B for 7 seconds.
- Push the crown in to position 0.
- Remove "Eco-Drive W770" from the list of registered devices in the Bluetooth setting on the smartphone on which the registration information was removed.
The second hand points the number of the registration information currently chosen and the function hand indicates connection status (ON/OFF).
Deletion of the registration information currently chosen is finished as the second hand turns fully around.
The second hand and function hand return to normal indication.
!
When "Eco-Drive W770" cannot be seen, it has already been deleted.
4. Switch the saving destination of registration information.
- Pull the crown out to position 2.
- Rotate the crown to choose a free saving destination of registration information.
- Push the crown in to position 0.
The second hand points the saving destination of registration information currently chosen and the function hand indicates connection status (ON/OFF).
!
Each time you rotate the crown, the second hand moves as follows:
"1 o'clock" → "2 o'clock" → "3 o'clock" → (back to the top)
5. Register.
- Turn on Bluetooth on your smartphone.
- Start up the dedicated app on the smartphone.
- Press and release the upper right button B.
- Check whether "Connected" is displayed on the screen of the app.
!
Keep the screen of the app shown.
!
Agree when a dialog appears to request your permission to use Bluetooth connection.
The second hand points "ACT" (40-second position) and registration starts.
Registration is finished if "Connected" is shown.
The watch and the smartphone are connected as registration is finished.
The function hand of the watch points "ON" of connection status and the second hand returns to normal movement.
!
It may take about 20 - 30 seconds to finish registration.
When registration failed. remove all the registration information and try registration again following "Cannot register the first smartphone".
Related articles
Cannot register the first smartphone