How to use


YF20

Using the app

Executing settings for functions and assigning them to the buttons of the watch

You can assign various functions to the three buttons of the watch.
Some functions need setting on the dedicated app.

  1. Start the dedicated app.
  2. The watch and the smartphone are connected.

    !

    If you have not signed up, sign up.

    !

    If synchronization of the watch and the smartphone starts, wait until it is finished.

  3. Tap [Customization] on the bottom of the screen.
  4. Tap the button which you want to assign a function on the [Customization] screen.
  5. The list of functions is shown on the bottom of the screen.

    !

    The example above shows when the lower right button A is tapped.

    !

    When you want to assign a function to a button in another set, swipe the screen aside before tapping the button and choose one.

  6. Tap the function you want to assign on the bottom of the screen.
  7. You can choose one from the functions below.

    [Riiiver]Use this to assign an iiidea of Riiiver to a button as a function.
    Function setting: turn on iiideas on [iiidea List] to make iiideas of Riiiver appear on the bottom of the screen.
    Riiiver and iiideas are not shown on the list in places where the Riiiver service is not available.
    Even after assigning an iiidea, it is not shown in places where the Riiiver service is not provided.
    [UV INDEX]An iiidea of Riiiver.
    It indicates UV indexes of three places including the current one.
    iiidea setting: choose places on [UV Index] of [iiidea List].
    [SURF REPORT]An iiidea of Riiiver.
    It indicated special weather reports for surfing.
    iiidea setting: choose places and units on [Surf Report] of [iiidea List].
    [HUE LIGHT]An iiidea of Riiiver.
    It controls Hue, a smart light of Philips.
    iiidea setting: Hue environmental settings and Hue account login are required.
    This function is available on iOS only.
    [GOLF REPORT]An iiidea of Riiiver.
    It indicated special weather reports for golf.
    iiidea setting: choose a golf links on [Golf Report] of [iiidea List].
    [GOLF COURSE]An iiidea of Riiiver.
    It indicates information of each hole of a course such as length and handicap.
    iiidea setting: choose a golf links and its course on [Golf Course] of [iiidea List].
    [Delivery Tracking]An iiidea of Riiiver.
    You can check delivery tracking information of your parcel.
    iiidea setting: enter the name of delivery service and the tracking code of your parcel on [Delivery Tracking] of [iiidea List].
    [Flight Information]An iiidea of Riiiver.
    You can check information of the flight you registered.
    iiidea setting: enter flight information on [Flight Information] of [iiidea List].
    [WORKOUT MODE]It measures your exercise and indicates its result for each exercise type.
    Results of your exercise are indicated on the screen of the app.
    [WELLNESS DASHBOARD]It indicates [STEPS], [ACTIVE MINUTES], [ACTIVE CALORIES], [HEART RATE] and [SLEEP] of a day.
    It measures your heart rate.
    [STOPWATCH]It provides stopwatch measurement.
    The minute hand overlaps the hour hand and they moves to indicate seconds.
    [PAST NOTIFICATIONS]It indicates notifications.
    Function setting: it is required to execute settings for notifications on [NOTIFICATIONS] on the [Alerts] screen.
    [MUSIC CONTROL]You can control music playback through the watch while using the music app: can command play/pause/go previous/go next.
    Play/pause: Press the middle right button B once.
    Volume up: Press the upper right button C once.
    Volume down: Press the lower right button A once.
    Back to the previous tune: Press and hold the upper right button C.
    Forward to the next tune: Press and hold the lower right button A.
    [TIMER]It provides a countdown timer.
    The minute hand overlaps the hour hand and they moves counterclockwise to countdown seconds.
    You can set up to 60 minutes in 1-minute increments as countdown time.
    The watch vibrates when time is up.
    Function setting: countdown time must be changed on the watch itself.
    [WEATHER]It indicates weather reports of up to three places including the current one.
    Function setting: choose places on [ADD LOCATION].
    [COMMUTE TIME]Time required from the current place to the destination is displayed.
    Function setting: assign the destination on [SAVED DESTINATIONS].
    [CONNECT CHALLENGE]It indicates progress of [Challenge] you join and records of past challenges.
    You can see information of the last five challenges.
    Function setting: settings on the [Challenge] screen are required.

    !

    You can search functions and narrow down items using [SEARCH], [ALL], [POPULAR], [ACTIVITY], [SCHEDULE] and [ENVIRONMENT] on the function list.

    !

    Items shown on the function list may differ depending on status of the watch.

  8. Tap the check box on the upper right of the screen to finish the procedure.
  9. The selected function is assigned to the button.

    !

    Tap [X] on the left to cancel setting.

To try to use assigned functions

When you press a button of the watch which a function is assigned to, the screen for the function is shown on the display of the watch.

!

Some functions needs Internet connection through the dedicated app.

After using functions

Press and hold the middle right button B to return to normal indication.

!

Measurement of functions such as the timer continues after returning to the normal indication.

Related articles

What is Riiiver?

Next:

Switching the set of the buttons