Features

Troubleshooting


Support top

Figure

MENU

W770

Alarm does not work

Alarm sounds at an incorrect moment.

Below are possible causes. Try remedies from the top to the bottom.

CauseRemedies
The power reserve is not enough.Charge the watch.
The mode of the watch is not [TME].Change the mode of the watch to [TME].
The Alarm time set is wrong.Check alarm time setting.

Charge the watch.

When the second hand is moving once every two seconds, alarm does not sound. In addition, you cannot check or change the alarm time setting.
Charge the watch.


Change the mode of the watch to [TME].

The alarm emits sound when the time of the [TME] mode comes to the alarm time set. If you see the time of the [L-TM] mode, the alarm may not emit sound at the time you expected.

  1. Pull the crown out to position 1.

    2. The second hand points to 30 seconds and stops.

  2. Rotate the crown to change the mode to [TME].
  3. Push the crown in to position 0.

Check alarm time setting.

Check the alarm time setting and adjust it if needed.
Change the alarm setting (ALM ON/OFF) to "ALM ON" to activate the alarm.

Related articles

Changing alarm setting